David’s 44mm BOYD Clinchers
-
// Hubs
White Industries T11
-
// Rims
BOYD 44mm Carbon Clincher
-
// Spokes & Nipples
Sapim CX-Ray – Orange Alloy
-
// Lacing Pattern
Front – 24 Hole Radial
Rear – 28 Hole Two Cross -
// Weight
Front – 716g
Rear – 880g
Pair – 1596g
(with Rim Tape) -
David was looking for a do it all set of wheels for the summer months. Something that will give him a bit of extra oomph on the club runs in Surrey but not too sensitive to the odd gust of wind.
I opted for a higher spoke count to add stiffness as David is 6’3″ tall and rides harder climbs out of the saddle. White Industries T11’s in the centre with their large bearings, Oversize Cromo axle and Ti freehub are a super strong and reliable set of hubs.
Boyd Cycling is a rider owned company from South Carolina in the States. They produce fantastic products and the 44mm clincher rim fitted David’s requirements perfectly. The orange nipples match his custom painted Seven titanium frame beautifully.