Toolbox

Performance Service Centre

I have recently downsized back to my #MANSHED so servicing spots are limited please get in touch on 07876 494 090 or send me an email to: jonny@noble-wheels.com

The Mechanic

Jonny

Bell
Jonny Mug Shot

I started off at Evans Cycles when I was 15 years old as the Saturday ‘half boy’. When I left school I started full time in the bike shop learning the mechanical side of things. Since then I’ve worked in the workshops of Prologue, Giant & Bespoke Cycling before setting up Noble Wheels in 2011. I have a love for fancy bikes and doing a job properly with all the small details looked after.

Currently riding // Curve Belgie Spirit Ti // DT240s – Noble 46mm Carbon Wheels

Services & Pricing

Level 1

Service
Banner £100
Frame and forks wiped down and inspected
Drivetrain checked for wear, cleaned, re-lubricated & adjusted
Brakes checked for wear, cleaned & adjusted
Seat post removed, cleaned & re-fitted with correct grease/paste
Tyres checked for wear and inflated to correct pressure
Wheels cleaned, checked for wear and trued if required
Headset, BB & hub bearings checked & adjusted
Di2 / EPS batteries charged if required
Job time – 2 Hours

Level 2

Service
Banner £150
Frame and forks wiped down and inspected
Drivetrain checked for wear, cleaned, re-lubricated & adjusted
Brakes checked for wear, cleaned & adjusted
Seat post removed, cleaned & re-fitted with correct grease/paste
Tyres checked for wear and inflated to correct pressure
Wheels cleaned, checked for wear and trued if required
Headset removed, cleaned, greased & re-fitted
BB removed, cleaned, greased & re-fitted
Di2 / EPS batteries charged if required
Job time – 3 Hours

Servicing

Extras
Banner £50 per hour
Standard labour charge (unusual jobs etc.) – £50 per Hour
Hub overhauls – Front from £20 – Rear from £30
Di2 firmare updates and diagnostics – From £10
Disc brake bleeding – From £10 per brake
We charge a corkage fee for parts to be fitted during a service if purchased from large, faceless, tax avoiding companies. Support your local community and skilled workers 🙂

Custom

Bike Build
Banner £150
All components checked for compatibility and installed as per manufacturers guidlines
We use torque wrenches not guesswork
Super neat cabling as standard
The best bar tape job. FACT!
Position set up as per bike fit data (if supplied)
Hydraulic disc brake installation – £20 extra
Di2 / EPS Electronic groupset fitting – £20 extra
Photo 14-03-2018 12 04 25 1

After you have typed in some text, hit ENTER to start searching...