THIS IS A PRE-ORDER ITEM WITH DELIVERY EXPECTED FROM OUR CNC PARTNER AT THE END OF JUNE 2023
The Noble hub bearing install set takes a different approach to fitting replacement bearings over the more common threaded 'press' type sets. We have gone for the hammer and vice route similar to the DT Swiss style but with the addition of dummy axles to ensure correct bearing alignment.
We have 11 pairs of drift sizes available grouped into 5 different bore diameters. all of the drifts are made from stainless steel and the dummy axles are made from solid brass. This is a set for life - even in heavy use workshops. All sizes are laser marked.
10mm Bore Size
Brass Hammer Striker x1, 10mm Brass Dummy Axle x1, Stainless Drifts 6900 x2, Stainless Drifts 6000 x2.
12mm Bore Size
Brass Hammer Striker x1, 12mm Brass Dummy Axle x1, Stainless Drifts 6901 x2, Stainless Drifts 6001 x2.
15mm Bore Size
Brass Hammer Striker x1, 15mm Brass Dummy Axle x1, Stainless Drifts 6802 x2, Stainless Drifts 6902 x2, Stainless Drifts 1526 x2.
17mm Bore Size
Brass Hammer Striker x1, 17mm Brass Dummy Axle x1, Stainless Drifts 6803 x2, Stainless Drifts 6903 x2, Stainless Drifts 1728 x2.
18mm Bore Size
Brass Hammer Striker x1, 18mm Brass Dummy Axle x1, Stainless Drifts 1830 x2.
To use this set you will also need a dead blow/soft faced hammer and a bench mounted vice.
