Threaded Hub Bearing Extractor Set

PRE-ORDER IS NOW CLOSED EARLY AS ALL 100 SETS ARE SOLD - DELIVERY IS EXPECTED LATE JUNE FOR THIS FIRST SOLD OUT BATCH

HUGE THANK YOU TO EVERYONE WHO HAS PLACED AN ORDER

After months of design work, prototyping and testing we are proud to release pre-orders for our latest bearing tool set. The threaded bearing extractor uses the Chris King style split collet to capture bearings in systems that have a spacer tube between bearings, however this tool will work to remove most bearings where the axle has already been removed (we make a tool for this HERE). 

How Does It Work?

Let's say we're removing the outside 6803 (17x26x5) bearing from a Campagnolo freehub. First you'd select the 17mm bore extractor and the 26mm receiver cup. Then you set the bearing width to 5mm by moving the circlip to the correct groove on the brass collar. Grab youself two 4mm allen keys, insert the tool into the bearing and tighten down the top bolt to expand the collet behind the bearing (this only needs 1/4 to 1/2 a turn). Next push the receiver cup up to the freehub and lock down the nut. keeping the 4mm allen key in the bearing end of the tool, tighten the 13mm (M8) nut with a spanner to extract the bearing. Job done.

This kit will work on hub, freehub and pivot bearings.  

What's Included?

• 12mm Bore Extractor x 1
• 15mm Bore Extractor x 1
• 17mm Bore Extractor x 1
• 20mm Bore Extractor x 1
• 24mm Bearing Receiver Cup x 1
• 26mm Bearing Receiver Cup x 1
• 28mm Bearing Receiver Cup x 1
• 30mm Bearing Receiver Cup x 1
• 32mm Bearing Receiver Cup x 1
• 37mm Bearing Receiver Cup x 1

This complete set of extractors will remove any of the 28 different bearing sizes listed below: 

There is NO UK VAT to pay on this tool - Noble Wheels is not a UK VAT registered company. Import TAX/duty may be payable to your local courier prior to delivery if ordering from outside the UK.